IMPA / ISSA CERTIFIED MARINE PRODUCT
Reverse Emulsion Breaker 2366
Sewage Chemicals Treatment
Express Mormugao Port 2-4 Hr Berth Delivery
Reverse Emulsion Breaker 2366 is a formulation of cationic polyelectrolytes and inorganic salts used in theclarification of oil field and industrial waste waters.
Ready Port Stock
25L, 210L Drums & 1000L IBC
IMPA / ISSA Standard
MARPOL Compliant Formulations
ISO 9001:2015 QA
TDS, MSDS & COA Available
Application & Uses
Industrial waste water treatment.
Dosage & Directions for Use
Direction For Use :
-
Reverse Emulsion Breaker 2366 (Polyfloc)c should be injected at a point in the system where agitation (natural or mechanically induced) is sufficient to mix with the fluid to be treated.
-
Location of the injection point for maximum efficiency will have to be determined empirically, but normally longer mixing times give the best clarification results.
-
If Reverse Emulsion Breaker 2366 (Polyfloc) is used in secondary treatment of oilfield waters, it should be injected upstream of the
treating vessel in the pump suction or in the first cell.
-
Use concentrations can vary from 1 to 100 ppm. Initial use concentration can best be determined by jar tests, while the final use concentration will be determined in the system.
-
When Polyfloc is used in combination with other water clarification chemicals, injection points it should be separated enough to allow complete mixing of one before the other is introduced. Jar tests will be required to determine which order of addition is most efficient.
- Clarification may in some systems may be more effective if the pH of the system is adjusted to less than 7.0.
Technical Specifications & Properties
Typical Properties :
| Form | Viscous Liquid |
| Appearance | Clear Pale yellow, mobile liquid; |
| Odour | Ammonical |
| Viscosity @ 20°C | 400 - 800 cp |
| Flash Point | >94°C |
| Boiling Point | >100°C |
| Freezing Point | -12°C |
| pH | 3.5 - 4.10 |
| Relative density | 1.14 - 1.20 |
| Water solubility | Soluble |
Product Description & Chemical Profile
Reverse Emulsion Breaker 2366 RX is a formulation of cationic polyelectrolytes and inorganic salts used in theclarification of oil field and industrial waste waters. The product may be used in conjunction with mechanical clarification methods such as gas flotation units and hydrocyclones.
Mormugao Port Logistics Desk
Need pricing, bulk volume, or vessel delivery today?
Send us your required quantity, delivery location, or vessel IMO number. Our technical marine supply team replies within 1 hour.