ALKACLEAN s. LAC

It can be used as a general purpose cleaner to remove oil and grease deposits.First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using RXSOL-20-2015-020 is by direct injection followed by recirculation washing, using tank cleaning machines. Spraying Method  - Using LAC as delivered in drums, spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), then butterworth at maximum pressure and warm water 60oC for at least 3 hours, checking that there is no foam remaining in the final stages.  Inspects tanks(s) and if desired result has been achieved fresh water rinse and dry.

** Make sure to take all safety precautions are followed when handling / spraying RXSOL-20-2015-020

Injection Method – not applicable.

Refer to technical datasheet

• Removes grease, oil, carbon deposits, soil and grime.
   
• Keeps loosened deposits in suspension preventing re-deposition.
   
• Low toxic.  , Non-flammable.
   
• Free from hydrocarbon solvents.
   
• Effective and economical in use , Water-based cleaner.
   
• RXSOL-20-2015-020 has numerous cleaning applications including removal of greases, waxes,
   
• oil, sludge, soot, carbon   deposits and general dirt and grime.
   
• Non-corrosive to ferrous metals.  Suitable for all tank-coatings.
   
• Can be used for gas and hydrocarbon freeing of tanks.
   
• Can be used for deodorizing
   
• Contains wetting agents.

NOTE : Acts as an acid-neutralizing agent.