Skip to main content
Home / Products / Ship Hold Cleaner / Muriatic Acid 60 Kg
IMPA / ISSA CERTIFIED MARINE PRODUCT

Muriatic Acid 60 Kg

Ship Hold Cleaner Muriatic Acid 60 Kg
Express Mormugao Port 2-4 Hr Berth Delivery
Ship Hold Cleaner
IMPA / SKU Code: RXSOL-22-2205-060

Clean ship hold and Brighten Surface and also easily cleans mineral, salts deposits as well as algae and scum.

Available Packaging:
5, 10, 20, 30, 60, 250 Kg fully new acid resistance drums. Available stock at Chennai, Ennore, Tuticorin, Visakhapatnam - Gangavaram, Kakinada, Paradip, Haldia, Kolkata, Mumbai, Nhava Seva, Surat - Hazira, Kandla, Mundra, Gandhidham - India. Fujairah - Dubai - Middle East, UAE.
Ready Port Stock 25L, 210L Drums & 1000L IBC
IMPA / ISSA Standard MARPOL Compliant Formulations
ISO 9001:2015 QA TDS, MSDS & COA Available

Application & Uses

Muriatic Acid comes in liquid form, While we have Muriatic acid in Gel - Viscous form which is resulting with the excess blend of surfactant and a thickening agent, which is not only increasing importance to use on the vertical surface where liquid use is not possible but also increasing cleaning action without smoke generation.

Dosage & Directions for Use

Before uses of Muriatic acid chemical washing, Removal of more excess residues during dry cleaning either manual sweeping or air blown is always been wise decision. After dry cleaning, the holds are to be chemically washed with Muriatic Acid/Hydrochloric Acid and leave the surface for 15-30 minutes to allow maximum efficiency but not to dry out. Finally washed with Sea Water and rinsed with Fresh Water (depending on the next cargo).
 

Technical Specifications & Properties

PRODUCT SPECIFICATION SHEET

Muriatic Acid

Parameters

Specification Range

Typical

% Strength

34.5 – 35.5

35.0

Specific gravity @ 60°F

1.175 – 1.182

1.18

Degree Baumē (Bē)

21.8 – 22.2

22.0

Iron (ppm)

0.5 – 1.5

< 0.5

Color (APHA)

N/A - 20

< 20

Total organic compound (ppm)

N/A – 5

< 5

Lead (Pb) (ppm)

N/A - 1

<1

Oxidizing substance (as cl2 ppm)

N/A – 30

< 30

Reducing Substances (as SO3)

N/A - 70

<70

Non-Volatile Residue (wt.%)

N/A - 0.5

<0.5

Sulfate (SO4) (%)

N/A - 0.5

<0.5

Recommended Industrial & Shipboard Areas

Tips for general cleaning of Cargo Holds.
1st step is Manual Cleaning: First of all try to remove all loose / deposited cargo,  live & dead insect & weevils from Holds frames, beams, girders, and other structure by manual swiping or air blown pressure method. This step not only help to consume less clean requirement but also loose debris cargo materials can mess entire surface with contact of a liquid solution, further can kill more time.

2nd Step is Inspection: After following the 1st method of manual cleaning try to remove loose rust/paint skin from the metal surface, For this step Metal Bright Rust remover and paint remover can save more time other than manual scraping cleaning methods. As we observe that only 25 ltrs to 50 Ltrs of Metal Clean Bright is sufficient to complete this step of cleaning of Bulkheads, upper and lower hopper spaces, underneath of Hatch Covers and the tank top.

3rd step is for Wise Decision for selection of suitable cleaner :  Then apply selected hold cleaning agent like AQUAATUFF Ship Hold Cleaner, hold brite, Alkaclean, Coal Remover, Cement remover, Hodwash, Rock Phosphate cleaner, HBI cleaning agent, Sodium Hypo, Muriatic Acid, Citric Acid, Fore and Aft, PCS hold cleaner, Teepol and other detergent cleaners. Before selection of any cargo hold cleaning detergent understand chemical property of cleaner and actual requirement, For example, if cargo is lime then Lime Remover can works better then AQUAATUFF Ship Hold Cleaner. As lime contains alkaline component when it comes in contact with moisture, solidification starts which becomes hard solid deposition. The hard solid lime deposit can be easily broken in to lose muddy mass by application of RXSOL LIME WASH, Its chemical formula is effectively neutralized alkaline content of LIME. Similarly, cement remover, Coal Remover and other specialized hold cleaner contain specialized materials to work fast on specific cargo.

4th step is for Bilge Area: Bilge covers should be cleaned of any cargo residues. Check each and every drain hole should be open and  Bilge cover must be covered with BURLAP, not with plastic or other watertight materials ( for ready reference pl. click here ). And Bilge tank should be cleaned and odour free by using suitable detergent with deodorizer and antibacterial properties. Chemically ppm level of potassium permanganate can play best role which is not only disinfected surface but also can deodorize the tank.

Available stock at Kandla, Mundra ( Gandhidham ), Mumbai, JNPT - Nhava Seva, Goa, Manglore, Vishakhaptnam - Vizag, Gangavaram, kakinada, Chennia - Ennore, Tuticorin, Kolkata - Haldia, Paradip - INDIA and All middle east port - Dubai, Sharjah, Fujairah, Abu Dhabi ...

Product Description & Chemical Profile

Muriatic Acid supplier and exporter in India and Middle East. Muriatic Acid clean ship hold and Brighten Surface and also easily cleans mineral, salts deposits as well as algae and scum.

Mormugao Port Logistics Desk

Need pricing, bulk volume, or vessel delivery today?

Send us your required quantity, delivery location, or vessel IMO number. Our technical marine supply team replies within 1 hour.