Salt Remover Passivation Liq

Degreaser

Express Mormugao Port 2-4 Hr Berth Delivery

Degreaser

IMPA / SKU Code: RXSOL-10-1011-025

Liquid Soluble Salt Remover targets and removes liquid soluble salts such as chlorides, nitrates, and sulfates

Available Packaging:

250 Ml, 1 Ltr ,5, 10, 25, 35, 210 Ltr Chemical cleaning of rust is a wise decision, as this is not only cleaning rust but also chemically neutralizing rusted metal surface to restrict further rusting. Factory sale of Metal clean Britee helps to save up to 50 percent on market price. This is classified RUST & SCALE REMOVER, DETERGENT TYPE.

Get Quote on WhatsApp Request Written RFQ +91 8069976670

Ready Port Stock 25L, 210L Drums & 1000L IBC

IMPA / ISSA Standard MARPOL Compliant Formulations

ISO 9001:2015 QA TDS, MSDS & COA Available

Application & Uses

SURFACE PREPARATION: Best surface preparation yields the best results. If hydrocarbons are present, they should be removed prior to salt removal. Barrier materials, such as rust or scale or delaminated coatings, should be removed prior to salt removal. Sufficient mechanical force may be utilized so barrier materials are removed as part of salt removal procedures.

Where to use Salt Remover?

Marine and offshore equipment exposed to seawater
Ship decks, pipelines, and engine room components
Heat exchangers and condensers
Storage tanks and metal surfaces before painting/coating
Industrial machinery affected by salt deposition
Desalination plants and coastal installations

Dosage & Directions for Use

RECOMMENDATION : Ready to use direct from the container- Single Component Product no dilution necessary.

FIELD:- Typical Coverage: 300 square feet per gallon

Before and after cleaning a small sample area, test the surface for contamination. Rewash as necessary and retest to assure desired cleanliness is achieved. It is not necessary to use the entire contents. Partially filled containers should be tightly closed.

specially designed for Soluble Salt Remover is a pre-mixed, Direct-To-Surface solution to ensure a salt-free surface prior to coating..

Procedure for Use :- is an organic bonding chemical blend which aids in the removal of chlorides, sulfates and nitrates and most other soluble salts.

RXSOL-10-1011-025 is highly concentrate
Always use directly on surface
The surface should be sound clean and free of oil, grease, dirt etc.
Apply on the rusted / salted area for 15 to 20 minutes For stubborn hevy deposits.

Technical Specifications & Properties

PRODUCT PROPERTIES :

APPEARANCE	Clear Liquid
DENSITY	g/cm3 at 15°C: 1.2
pH	2.5-3.5	Buffer Action of materials makes it different from other BRAND.
COMPATIBILITY
METAL	Suitable for M.S and S.S metal
RUBBER	No known effect
PACKAGING	Order No. RXSOL-20-1011-210	Size (in litres) 25 , 35 , 210

* Shelf Life: 60 months

* pH 3.4 (+/- .2)

* Application temperature: +32 °F

* Packaging: 1/5/55 US gallons

Recommended Industrial & Shipboard Areas

Super Dilac Acidic low foaming Detergent Metal Clean Britte is Cargo hold and Tank cleaning chemicals. Which is also useful products for Deck and maintenance cleaning and rust removing.

Before application of Super Dilac Acidic low foaming Detergent Metal Clean Britte, we have to understand its cleaning principal...

In general terms and thumb rule for Metals Britte is MORE RUST required more Super Dilac Acidic low foaming Detergent Metals Britte. Chemically Rust { iron oxide (FeO) } is soluble in pH values below 4.0, . Thus, the oxide (oxygen) dissolves as it is formed instead of depositing on the metal's surface. So it is clear more rust required more Metal clean Britte to get dissolve. In practical if the area is fully rusted corroded then direct Metal Clean Britte can be used to dissolve rust particles, while in light contaminated part Metals Clean Britte can be diluted in between 20 to 70% .

2nd factor is the time which is directly affecting the cleaning result. If base metal is aluminium then use Super Dilac Acidic low foaming Detergent Metals Clean Britte concentration 10 to 30% for not more then 5 Minutes. For removal of rust stains on painted or iron surfaces, use 10-30% of Metals Clean Britte soultion for 15-20 minutes. And for heavily rusted and corroded or soiled surfaces and tarnish on copper and brass, use a solution of 20-50%, for 15-40 minutes.

The 3rd important point always be noted, After cleaning of rust from Metals clean Britte all area should be fully rinsed and clean properly with fresh water. And for best long time result to keep rust free surface, Surface can be chemically neutralized with RXSOL-41-8896-025 ( dilution ration 1 Ltr RXSOL-41-8896-025 with 10 Ltr water ). The scientific reason behind that is As With the Rust oxide gone with Metals Clean Britte, the metal surface is in direct contact with the acidic solution, and the corrosion reaction proceeds at a greater rate than it does at higher pH values. For increasing pH values greater than pH 10, the rusting rate seems to fall as pH is increased with help of RXSOL-41-8896-025.(http://www.rxmarine.com/Professional-Heavy-Duty-Alkaline-Cleaner)

Product Description & Chemical Profile

Direct to Surface Heavy Duty acidic detergent Specially designed for removal of Liquid Soluble Salt Remover targets and removes liquid soluble salts such as chlorides, nitrates, and sulfates rust from any steel surface area also acts as rust proofing agent. It is non-flammable. Prevents further rusting. Detergent cleans Metals surface. And useful product in maintenance and cleaning sector. In the food and Beverage industry, Metals Clean Britte is used as a rust remover. Largest seller and supplier of Super Dilac Acidic Detergent in INDIA Oman, GULF Middle East AND NAIROBI KENYA Africa.

RXSOL Salt Remover Passivation Liquid is a specially formulated acidic surfactant-based cleaning solution designed for effective removal of salt deposits, mineral residues, and light corrosion products from metallic and non-metallic surfaces.

The formulation combines controlled acidity with surface-active agents, enabling deep penetration and dissolution of salt crystals while simultaneously assisting in surface conditioning (passivation effect), thereby reducing the risk of further corrosion.

Mormugao Port Logistics Desk

Need pricing, bulk volume, or vessel delivery today?

Send us your required quantity, delivery location, or vessel IMO number. Our technical marine supply team replies within 1 hour.

WhatsApp Us Now Request Fast Quote