Sea Chest Antifoulant Aquasperse

• Sea chests
• Seawater cooling systems
• Strainer boxes
• Filter boxes
• Seawater pipe lines
• Heat exchangers
• Central cooling systems
• Static or flowing seawater systems

Ensure all systems are completely free of marine growth prior to applying AQUASPERSE RXSOL. Where required, pre-clean using DESCALING LIQUID EXTRA or RXSOL Safe Acid DESCALEX POWDER. Marine organisms require a surface to anchor; if existing growth is not removed beforehand, it will continue to provide a base for further attachment even after AQUASPERSE RXSOL Sea Chest Antifoulant dosing.

SEAWATER COOLING SYSTEMS
Inject AQUASPERSE into the sea chests using dosing equipment once every two days for a duration of one hour, adjusted according to the seawater flow rate of the system. In harbour conditions or areas with high shellfish activity, increase dosing frequency to once daily.

A concentration of 3 ppm AQUASPERSE RXSOL is adequate for fouling prevention. This corresponds to a dosage of 0.3 litres per 100 tons per hour of seawater flow.

DEEP SEA VESSELS
Dose RXSOL AQUASPERSE into the suction box or strainers at a rate of 0.3 litres per 100 tons of flow, applied over one hour every 48 hours.

COASTAL VESSELS
Meter AQUASPERSE into the suction boxes or strainers at 0.3 litres per 100 tons of seawater flow, distributed over a 24-hour period.

Example:
For a circulating pump capacity of 250 TPH, the required dosage is:
0.3 × 2.5 = 0.75 litres of AQUASPERSE for one hour.