Typical Applications

The product can be considered for suitable tile and grout surfaces in:

• Commercial buildings

• Hotels and hospitality facilities

• Restaurants

• Shopping and retail facilities

• Offices

• Residential properties

• Bathrooms and wash areas

• Floor and wall tile maintenance

• Cleaning and restoration projects

• Professional tile-care operations

Before application, the actual tile, grout and substrate should be checked for compatibility and a small inconspicuous test area should be treated.

Surface Preparation

Proper surface preparation is important for achieving consistent results.

Before application:

1. Thoroughly clean the tile and grout.

2. Remove dirt, grease, old residues and other contaminants.

3. Allow the surface to dry as required.

4. Check for existing sealers or coatings.

5. Test the product on a small inconspicuous area.

6. Confirm compatibility before treating the complete surface.

The surface should be adequately clean and prepared before sealing.

Application

Apply the product according to the current manufacturer label, TDS and SDS.

The application method may depend on the surface, porosity and project requirements. Avoid uncontrolled aerosol generation and provide appropriate ventilation.

Do not use an assumed dilution, coverage rate or contact time unless it is confirmed by the current product TDS or manufacturer instructions.

Technical Identification

The available SDS identifies the product formula as F1211 101-92-C and describes a partially fluorinated alcohol reaction product with phosphorus oxide and ammonium salts at less than 3% in the listed formulation.

Suitable Professional Users

Sapphire Scientific Penetrating Tile and Grout Sealer may be relevant to:

• Professional cleaning companies

• Carpet and floor-care contractors

• Tile restoration contractors

• Building maintenance companies

• Hospitality maintenance teams

• Facility-management companies

• Commercial cleaning contractors

• Property maintenance companies

• Construction and renovation contractors

Safety & Handling

Handle the product according to its current SDS.

Important precautions include:

• Avoid breathing spray mist or aerosol.

• Provide adequate ventilation.

• Use suitable eye and skin protection.

• Avoid unnecessary exposure.

• Wash contaminated skin with soap and plenty of water.

• In case of eye contact, rinse thoroughly with water and seek medical attention as directed by the SDS.

• Store and handle according to the manufacturer's current safety documentation.