Skip to main content
Home / Products / Cooling Water Chemical / CorroSOL 40 Nitrite Corrosion Inhibitor
IMPA / ISSA CERTIFIED MARINE PRODUCT

CorroSOL 40 Nitrite Corrosion Inhibitor

Cooling Water Chemical CorroSOL 40 Nitrite Corrosion Inhibitor
Express Mormugao Port 2-4 Hr Berth Delivery
Cooling Water Chemical
IMPA / SKU Code: RXSOL-43-4023-020

Nitrite based corrosion inhibitor for excellent protection for chilled water, LTHW systems

Get Quote on WhatsApp Request Written RFQ +91 8069976670
Ready Port Stock 25L, 210L Drums & 1000L IBC
IMPA / ISSA Standard MARPOL Compliant Formulations
ISO 9001:2015 QA TDS, MSDS & COA Available

Application & Uses

CorroSOL 40 Nitrite Corrosion Inhibitor is an extremely strong passivator of exposed or corroded metal surfaces.
CorroSOL 40 Nitrite Corrosion Inhibitor is NOT intended for use in systems containing Aluminium or galvanised pipework.
Engine Jacket Cooling or heating system, Chiller Water Circuit, Glycol Brine System, Hot Water or steam Circuit, Engine Coolant,Process chilling and heating system etc.
 

Engine Jacket Cooling or heating system, Chiller Water Circuit, Glycol Brine System, Hot Water or steam Circuit, Engine Coolant,Process chilling and heating system etc.

 

Dosage & Directions for Use

TYPICAL DOSE : 5 – 7 litres / 1000 litres of system water and make-up

Nitrite base Corrosion Inhibitor for Water and Glycol Brine is normally fed continuously to the re-circulating closed system by injection dosing pump of dosed to the expansion tank. The amount of Nitrite base Corrosion Inhibitor for Water and Glycol Brine required to inhibit corrosion depends on the type of system and plant operating conditions. The specific dosage rates can be specified by the testing and given parameter.

Technical Specifications & Properties

Appearance

Colourless 

Odour

Odourless 

pH

11-12 approx
Boiling Point / Boiling Range

Not determined

Melting Point/Melting Range

N/A
Flash Point N/A
Flammability Non flammable
Autoflammability N/A
Explosive Properties N/A
Oxidising Properties N/A
Vapour Pressure Not determined
Relative Density 1.18 approx
Solubility in water  Miscible
Solubility in other solvents  Not determined
Partition coefficient and N-octanol/water  ----------
Other Data None
 

Recommended Industrial & Shipboard Areas

How to use CorroSOL 40 Nitrite Corrosion Inhibitor
CorroSOL 40 Nitrite Corrosion Inhibitor should be added to the system at an initial dosage rate of 7 litres / 1000 litres of system water content. This will passivate metal and should establish the required minimum Nitrite reserve of 1200mg/l. Whenever the system is drained or loses a significant quantity of water then the additional CorroSOL 40 Nitrite Corrosion Inhibitor should be added at the rate of 5 – 7 litres / 1000 litres.
 
The active inhibitor reserve can be measured using a simple nitrite closed system testkit.

Product Description & Chemical Profile

Nitrite based corrosion inhibitor for excellent protection for chilled water, LTHW systems. CorroSOL 40 Nitrite Corrosion Inhibitor is a nitrite-borate based corrosion inhibitor containing an additional organic inhibitor to protect steel, copper and other non-ferrous metals. As such CorroSOL 40 Nitrite Corrosion Inhibitor is an ideal treatment for closed chilled water and low pressure heating systems.

Mormugao Port Logistics Desk

Need pricing, bulk volume, or vessel delivery today?

Send us your required quantity, delivery location, or vessel IMO number. Our technical marine supply team replies within 1 hour.

WhatsApp Us Now Request Fast Quote