RXSOL 2000 Corrosion Inhibitor

Application: All types of Engine Jackets, Radiator and Engine coolant.
The stable oxide film that is formed by RXSOL 2000-II prevents corrosion caused by electrolytic action between dissimilar metals used in the system . RXSOL 2000-II has been field tested and found to have no detrimental effects on non metallic substances such as seals, glands, packing, hoses, gaskets etc., normally used in these’ systems.

Application-Dg*

Sets Internal combustion engines closed circuit cooling system compressor cooling system. Rxsol 2000-II  incorporates superior corrosion inhibitors to prevent corrosion works by free of scale deposits.

Advatages: -

1. Prolong the life of equipment by keeping scale and corrosion free. Since RXSOL 2000-25 Ltr is alkaline and so will suppress acid corrosion, which would otherwise result in corrosion damage such as pitting. However, the alkalinity control is such that even if the product is accidentally overdosed, the pH of the water will remain within limits. The metals which would be affected by extremes of alkalinity or acidity are protected. protect cast iron diesel engine cooling systems.

2. Improves generating cooling efficiency by maintaining a clean heat transfer by protect against sludge and mineral scale formation.

3. Corrosion protection by using superior corrosion inhibitor.

4. Reduced maintenance and down time

5. Compatible with Coolants / Antifreeze solution / Glycol .

6. Friendly with Metals (Like steel, Copper, Aluminum, all alloys) & Non-metal (Rubber, Hoses, Gasket , and ‘O’rings.etc.)

7. Prevents over heating Effective against liner pitting and cavitation erosion.

NOTE :::
•Protects both ferrous and non-ferrous metals from oxygen & corrosion.
•Compatible with most coolants and anti frizzles.
•Non staining.

Initial dosage for an untreated system is 9 litres of RXSOL 2000-II / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine life add RXSOL 2000-I every 500 -6500 km. or 250 to 300 hours of running time or every 2 month interval .

 Benzotriazole                                 14-15%
This product also contails Benzotriazole , which is very effective  effective corrosion inhibitor for copper and its alloys by preventing undesirable surface reactions. It is known that a passive layer, consisting of a complex between copper and benzotriazole, is formed when copper is immersed in a solution containing benzotriazole. The passive layer is insoluble in aqueous and many organic solutions. There is a positive correlation between the thickness of the passive layer and the efficiency of preventing corrosion. The exact structure of the copper-BTA complex is controversial and many proposals have been suggested.

AREAS  OF APPLICATION :

•Automobile.
•Heavy Equipment.
•Generators, Marine Engines.
•Ship or Rig Equipment.

#CorrosionInhibitorsRXSOL2000_Ajman

#CorrosionInhibitorsRXSOL2000_Dubai

#CorrosionInhibitorsRXSOL2000_Sharjah

#CorrosionInhibitorsRXSOL2000_Ajman

#CorrosionInhibitorsRXSOL2000_Oman