Air Cooler Cleaning Chemical LT

PROCEDURE OF USE :
In-service cleaning–RXSOL-16-1049-025 is  passes through the air trunking upstream of the charge aircooler, followed by a clean water rinse.For cleaning of air coolers, it is necessary to use correctly  installed  dosing  and  injection system.

DOSE :
3 to 5 litres of cleaning solution per square meter or as table below:

NOTE :
For cleaning of Air cooler and Air side of  turbochargers, a  solution  of  5 - 25% RXSOL-16-0009-ACC in fresh  water is recommended. Inject the solution for 10-15 minutes, then similar quantity of fresh water injected to rinse off emulsified deposits.

Hand spray Cleaning:-
By Hand spray,apply concentrate RXSOL-16-1049-025 all over the cooler coils. for good emulsification & penetration. Allow the RXSOL-16-1049-025 for a minimum of 1 hour,then use a high pressu ure  water to wash  off  the  loosened deposits. During process  always  keep drain valve  open. After satisfactory cleaning, and flushing through with fresh water, close air cooler drains.Note that during this process the engine must be stopped.

Soak method :
Machine parts with stubborn carbon deposits to be cleaned is dipped into conc.Soln.of ACC then   allow deposits to. Be broken down and loosened before removal, then rinse .